Galvanised steel lighting columns covered with Vertical Solar PV poles.

Advantages

Dedicated battery shelves:
Which facilitate improved maintenance, future proofing and management of luminaires.

Internally powder coated battery compartment:
High quality durable finish inside and out to protect both the pole and equipment contained within.

Anti critter guard:
Grid to prevent small animals, such as rats or larger, from entering and nesting inside the pole.

Vandal resistant screws:
Optional accessory to prevent people opening the pole to damage the internals or steal the batteries.

Quick connect system:
Pre-wired from the factory for ease of installation, improving efficiency and minimizing on site errors.

Flush mounted access panel:
Utmost care is applied to each detail, providing refined aesthetics and technical finesse for ultimate piece of mind.

Luminaire Structure

– Solar module consists of mono-crystalline high-efficiency cells
– Lithium Iron Phosphate (LiFePO4) battery
– Standard: Off-grid, 100% solar, not connected to the utility grid. Utility grid connection is available upon request
– Integrated temperature & motion sensors
– Different dimming options are available
– STD: 2 Step dimming with motion sensor override (3 hours: 60% without movement, 100% for 1 minute when the motion sensor activated. After 3 hours:
    30% without movement, 60% for 1 minute when the motion sensor activated)
– ND: Dusk to Dawn, CT: Custom examples are 5 Step dimming, Custom hours, Custom dimming levels (Step length and minimum dim level is 10%)
– Autonomy and Operation time calculations are done with the following information: Peak Sun-Hour (PSH) is 3 hours. Hours of operation are 12 hours
    per day. Detection of movement is 5 times per hour
– Remote solar charger controller system can be ordered as an accessory
– Autonomy and Operation time calculations are only indicative and will depend on several variable factors. Please contact the factory to determine
    the specific calculations for your project.

                    20W                     30W                     40W                    60W                     80W
Product Code System Solar module power Battery LiFePO4 12V 16.5Ah Luminaires operating 100% STD: 2 Step dimming with motion sensor override Luminaires operating 100% STD: 2 Step dimming with motion sensor override Luminaires operating 100% STD: 2 Step dimming with motion sensor override Luminaires operating 100% STD: 2 Step dimming with motion sensor override Luminaires operating 100% STD: 2 Step dimming with motion sensor override
Post top luminaires
SOL-20001 12Vdc 2X100 W 2X16.5 Ah  7.5 hrs 20.5 hrs  5 hrs 12.5 hrs 3.5 hrs 8.5 hrs          –        –          –         –
SOL-20011 12Vdc 2X140 W 3X16.5 Ah 10.5 hrs 29.5 hrs  7 hrs 19 hrs 5 hrs 13 hrs          –        –          –         –
SOL-20051 12Vdc 2X140 W 6X16.5 Ah 10.5 hrs 33.5 hrs  7 hrs 19 hrs 5 hrs 15 hrs          –        –          –         –
Street & area luminaires
SOL-20021 24Vdc 4X100 W 4X16.5 Ah 15 hrs 43 hrs 10 hrs 27.5 hrs 7.5 hrs 20.5 hrs 5 hrs 12.5 hrs 3.5 hrs 8 hrs
SOL-20031 24Vdc 4X140 W 4X16.5 Ah 21 hrs 59 hrs 14 hrs 38 hrs 10.5 hrs 30.5 hrs 7 hrs 19 hrs 5 hrs 13 hrs
SOL-20041 24Vdc 4X140 W 6X16.5 Ah 21 hrs 61.5 hrs 14 hrs 40 hrs 10.5 hrs. 30.5 hrs 7 hrs 19 hrs 5 hrs 13 hrs
SOL-20061 24Vdc 3X140 W 8X16.5 Ah 15.5 hrs 49.5 hrs 10.5 hrs 32.5 hrs 7.5 hrs 22 hrs 5 hrs 13 hrs 3.5 hrs 8.5 hrs

Note:       – Luminaires operating hours depend on the weather conditions
                 – Peak Sun-Hour used in the calculation is 3 hours per day
                 – Without any sun (autonomy), 6-8 batteries would last for 2-3 days

Standard / Custom dimming type options:

Solar-diagram
Solar module power2×100 W
Battery12V 2×16.5Ah
DiameterØ216
Luminaires operating 100 %20 W (8-9 Hours)
40 W (3-4 Hours)
Spigot76 mm
Thickness4 mm
Height4337 mm
Weight136.6 kg

LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project.
Please contact your local sales representative.

Solar module power 2×140 W
Battery 12V 3×16.5Ah
Diameter Ø216
Luminaires operating 100 % 20 W (12-13 Hours)
40 W (6-7 Hours)
Spigot 76 mm
Thickness 4 mm
Height 5137 mm
Weight 170.6 kg
LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project. Please contact your local sales representative.
Solar module power2×140 W
Battery12V 6×16.5Ah
DiameterØ216
Luminaires operating 100 %20 W (12-13 Hours)
40 W (6-7 Hours)
Spigot76 mm
Thickness4 mm
Height5637 mm
Weight200.2 kg

LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project.
Please contact your local sales representative.

Solar module power4×100 W
Battery12V 4×16.5Ah
DiameterØ216
Luminaires operating 100 %20 W (14-15 Hours)
30 W (9-10 Hours)
40 W (7-8 Hours)
60 W (4-5 Hours)
80 W (3-4 Hours)
Spigot76 mm
Thickness4 mm
Height6955 mm
Weight199.6 kg

LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project.
Please contact your local sales representative.

Solar module power 4×140 W
Battery 12V 4×16.5Ah
Diameter Ø216
Luminaires operating 100 % 20 W (31-32 Hours)
30 W (21 Hours)
40 W (15-16 Hours)
60 W (10-11 Hours)
80 W (7-8 Hours)
Spigot 76 mm
Thickness 4 mm
Height 8555 mm
Weight 263.5 kg
LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project. Please contact your local sales representative.
Solar module power 4×140 W
Battery 12V 6×16.5Ah
Diameter Ø216
Luminaires operating 100 % 20 W (31-32 Hours)
30 W (21 Hours)
40 W (15-16 Hours)
60 W (10-11 Hours)
80 W (7-8 Hours)
Spigot 76 mm
Thickness 4 mm
Height 9055 mm
Weight 284.8 kg
LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project. Please contact your local sales representative.
Solar module power 3×140 W
Battery 12V 8×16.5Ah
Diameter Ø216
Luminaires operating 100 % 20 W (18-19 Hours)
30 W (12-13 Hours)
40 W (9-10 Hours)
60 W (6-7 Hours)
80 W (4-5 Hours)
Spigot 76 mm
Thickness 4 mm
Height 8000 mm
Weight 285.6 kg
LIGMAN’s team of engineers can design a specific solar solution to meet the lighting requirements for your project. Please contact your local sales representative.

Vertical Solar PV Poles Brochure